Baseus 1.3W LED Solar Energy Motion Sensor Waterproof Wall Light (4PCS)

At Baseus, our products are based on our users. Quality, attention to detail and intuitive designs are all aspects that we pride ourselves with.

Full Product Name:
Baseus 1.3W LED Solar Energy Motion Sensor Waterproof Triangle Wall Light

Introduction:
High-conversion solar charging and high-sensitivity with motion sensor technology enable the light to automatically turn on and off when motion is detected. Without wiring and other materials, glare from the light illuminates a large area, suitable for courtyards, doorways, balconies, garages, etc.

Specifications:
– Material: ABS+PC
– Colour: Black
– Working Voltage of Solar Panel: 5.5V
– Light Source: LED
– Power: 1.3W
– Battery Capacity: 1200mAh
– Induction Distance: Up To 8m
– Induction Angle: 120 Degrees
– Lumen: 120lm
– Waterproof Level: IPX5
– Size: 111mm x 100mm x 89mm

Main Features:
– Solar Charging:
The built-in high-conversion solar panel enables automatic solar charging during the day so as to realize automatic induction in the dark.

– PIR Human Body Induction:
High-sensitive induction technology with a sensing distance up to 8 meters, enables the light to turn on when motion is detected and turn off automatically after the motion has stopped for 30 seconds.

– 120 Lumens, Precise Light Control:
40 high-brightness LED lamp beads plus newly upgraded reflector cups illuminate glare and achieve effective reflection for higher brightness and lighting up the wider area.

– IPX5 High Waterproof Level:
Upgraded rain-proof and anti-thunder protection ensure long-term use. No need to worry about damage when heavy rain and thunderstorms occur on cloudy and wet days.

– Long Battery Life:
Charging in high efficiency: charge 1 day and use 3 days, charge 6 hours, and use about 60 times.
(Under 10000lux sunlight, charge for 8 hours).
Up to 17% solar energy conversion efficiency.

– Large Capacity Battery:
1200mAh battery size.
Once charge can last for 24 days.
Fully charge battery after 7 sunny days, continuous use for 24 days after fully charged for clear illumination even on rainy days.

– Reflective Cups: 
Built-in reflector cups effectively reflect the light emitted by the main light source.
Improve light efficiency utilization and clearly illuminate the way forward.

– Easy Installation, No Wiring:
No power consumption and no wiring.

Instructions for Use:
– Please charge the light using natural sunlight for 1-3 days before the first-time use, and fully charge the battery for a better experience.
– Start up: press the switch button as shown in the figure to turn on the light and enter the human body sensing mode.
– Check: turning on the lamp. When covering the solar panel with an obstruction, the light should be on. When removing the obstruction, the light should be off- this indicates that the light is in normal working condition and is ready to be installed on a wall with sufficient sunlight.
– Motion Sensor: the solar motion sensor wall light has infrared induction.
– During the daytime, the light will be in solar charging with the light off. When the light fades, it enters the sensing mode. If people move in the sensing area, the light will turn on. After people stop moving in the sensing area or leave the sensing area for 30 seconds, the light will turn off; the sensing angle is 120°and the sensing distance is up to 8m.
– Installation: Install the solar light on the wall with sufficient sunlight. The solar panel needs to be facing up (receiving sunlight), with the sensor facing down (infrared induction).
– Notice: the light needs to be installed in an area under direct sunlight; the working time of the light is affected by the weather, environment, and the sunlight exposure time of the area;
– Application scenarios: outdoor areas with sunlight, such as doorways, paths, courtyards, garages, balconies, warehouses and fences;

Please Note:
– All of our premium Baseus Solar Lights have gone through rigorous quality control processes designed to make sure that our customers receive a product which can be relied on.
– Baseus and its distributor are not liable for misuse of Baseus products.
– Please read the user manual carefully before using the product.
– In order to effectively collect sunlight, please clean the surface of the solar panel regularly
– Please install the lamp in a sunny place.
– The battery life of solar body induction wall light is affected by weather; when rainy, snowy, cloudy and other bad weather occur continuously, the light usually turns on for a short time, or disables to turn on. The light will return to normal working state in the sunny day.
– The waterproof grade of the product is IPX5. It can prevent rain splashing normally but please do not install this lamp in a damp or low-lying area.
– Under severe sunlight, the charging efficiency of solar lamp is high, and under weak sunlight, charging failure or slow charging will occur.
– If the product is found to be faulty, please do not disassemble the product yourself to avoid damaging the product; it can be sent to our company’s maintenance personnel for repair.
– The light source of this lamp is irreplaceable. When the light source reaches the end of its life, the entire lamp should be replaced.

What’s in the box
4x Baseus 1.3W LED Solar Energy Motion Sensor Waterproof Triangle Wall Light
4x Screws
4x Screw Anchors
1x Instruction Manual